[. . . ] Radio CD MP3 Essen MP36 7 646 150 510 Operating instructions http://www. blaupunkt. com 2 1 3 4 5 6 11 10 9 8 7 2 CONTROLS DEUTSCH 1 2 Button to switch the device on/ off and operate the volume mute function. SRC button Short press: Switch sources between CD/MP3, CD changer (if connected) and AUX. Volume control CD compartment TRAF RDS button Short press: Switch traffic-information standby on/off. Keys 1 - 6 ; BND·TS button Short press: Select the FM memory banks. [. . . ] Once the traffic report has been played, the system will switch back to the programme you were listening to before. if you retune the radio from a traffic information station to a station that does not broadcast traffic information. If you hear the warning beep, you can either switch off traffic information priority or tune into a station that broadcasts traffic information. G Setting the volume for traffic announcements Press the MENU button 8. Press the or button 7 repeatedly until "TA VOLUME" appears in the display. When you have finished adjusting the setting, Switching traffic information priority on/off Briefly press the TRAF button Adjust the volume using the 6. Traffic announcement priority is active when the traffic-jam symbol lights up in the display. press the MENU button 8 twice. Notes: You can use the volume control 4 to adjust the volume during a traffic announcement for the duration of that announcement. For further details, please read the "Sound" chapter. G Note: You will hear a warning beep: G if you leave the reception area of a traffic information station that you are currently listening to. G if you are receiving a traffic information station and the volume is set to minimum (0) or if, whilst listening to a CD/MP3, a CD in the changer or an AUX source, you leave the reception area of the tuned traffic information station and the subsequent automatic search cannot find a new traffic information station. 40 CD MODE You can use this device to play standard audio CDs, CD-Rs and CD-RWs with a diameter of 12 or 8 cm. We do not accept responsibility for any damage to the CD drive that may occur as a result of the use of unsuitable CDs. To ensure the system functions properly, only use CDs labelled with the compact disc logo. Blaupunkt cannot guarantee the proper functioning of copy-protected CDs!Besides being able to play audio CDs on this device, you can also play CDs containing MP3 music files. For further details, please read the "MP3 mode" chapter. DEUTSCH DANSK PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH CD mode Note: G If the vehicle ignition was switched off before you inserted the CD, you will first have to switch on the device by pressing button 1 in order to start playing the CD. If there is already a CD inserted in the drive, press the SRC button 2 repeatedly until "CD" appears in the display. Playback begins from the point at which it was last interrupted. Selecting tracks Press one of the arrow buttons 7 to select the next or previous track. If you press the or button 7 once, the current track will be played again from the beginning. Fast track selection For fast track selection (backwards or forwards), Switching to CD mode If there is no CD inserted in the drive, Gently push the CD with its printed side uppermost into the drive 5 until you feel some resistance. The CD starts playing. press and hold down one of the / buttons 7 until fast-reverse / fast-forward track selection begins. Fast searching (audible) For fast searching (backwards or forwards), press and hold down one of the buttons 7 until fast searching backwards / forwards begins. 41 CD MODE Random track play (MIX) Press the 5 MIX button :. "MIX CD" appears briefly in the display and the MIX symbol lights up. Cancelling MIX track is repeated continuously until you deactivate RPT. Cancelling REPEAT If you want to cancel the repeat function, press the 4 RPT button : again. "RPT OFF" appears briefly in the display and the RPT symbol disappears. Normal playback is then resumed. Press the 5 MIX button : again. "MIX OFF" appears briefly in the display and the MIX symbol disappears. Scanning tracks (SCAN) You can scan (briefly play) all the tracks on the CD. For further details, please read the section entitled "Setting the scanning time" in the "Radio mode" chapter. The currently scanned track will then continue to be played normally. Pausing playback (PAUSE) Press button 3 :. "PAUSE" appears in the display. [. . . ] When you have finished adjusting the setting, press the AUDIO button 9. press the AUDIO button 9. 51 SOUND Equalizer presets This device is equipped with an equalizer that has been preset with settings for the "ROCK", "POP" and "CLASSIC" music styles. To select an equalizer preset, X-BASS X-BASS You can use the X-Bass feature to boost the bass at low volume levels. The selected X-Bass setting affects all the audio sources (radio, CD/MP3, CD changer or AUX). Adjusting the X-BASS boost press the AUDIO button 9. "BASS" appears in the display. Press the button 7 repeatedly until "POP", "ROCK", "CLASSIC" or "EQ OFF" appears in the display. or button 7 to select one of the presets or select "EQ OFF" to switch off the equalizer. [. . . ]